Annular Cutters | HSS
High Speed Steel - Magnetic Drill Bits

Annular Cutters HSS

Annular Cutters HSS are available in 1" / 2" / 3" / 4" / 6" Depth of Cut 

Please click on diameter of cutter and then choose depth of cut in the drop down screen.

 

 

An Annular Cutter can multiply your cutting speed by up to 3 times from traditional tooling. You get longer tool life, a more accurate hole, a better finish, with no burrs. Annular cutters maximize feed rates because up to 12 cutting edges distribute the cutting load evenly. Annular cutters convert a smaller are to chips, requiring less horsepower and thrust.

 

 

Stack-Cutting

Annular Cutters with a Stack-Cut tooth geometry must be used whenever two or more plates are being drilled simultaneously - often in a single pass. It should be noted that these modified cutters must be used when stack cutting. Non-modified Cutters cannot successfully cut through stacked material.

   

 We stock all sizes !

617-666-9090

 

Make sure that you have Ejector Pins & Lubricant when completing your order!

Do you need a cutter holder to adapt to a Drill Chuck?  Go to our holder section or call us to receive more information.

 

 

We are now able to view your applications via Video Conferencing, to offer immediate solutions!

 
 
 
 

If you don't see it... Ask for it!

 

Monday - Friday: 7am - 5pm EST

 

Call Us | 617.666.9090  or  617.512.0256

Email: info@hdchasen.com

 

 

Visit the H.D. Chasen Home Page!

 

 

 

 

Return Policy:
Items returned WITHIN 2 weeks of sale date, in good sellable condition* will be given a merchandise credit. Freight will not be credited.
Items returned AFTER 2 weeks of sale date, in good sellable condition, are subject to a 25% restocking charge. Freight will not be credited.