Structural Reamers are used extensively in Ship and Bridge building and Boiler manufactured where steel plates and shapes have punched or drilled holes that are under size and rough and where it is necessary to ream holes in assemblies to obtain proper alignment and size for accepting rivets, bolts, ect.
Diameter - 1 3/16"
Diameter at Point - 7/8"
3 Morse Taper Shank
OAL 12
MAY WE ALSO RECOMMEND
BRIDGE REAMER ADAPTER
Save time and Money by not having to weld a nut to the back of your bridge reamer
Increases tool life because the reamer is kept straight and ridged in the bridge reamer adapter
Safety First - The reamer remains in the adapter until you want to remove it -- No More Flying Missiles
